Typical Waveguide System Requirements

Page 27

A Typical Waveguide System Requires...

  1. Waveguide to Coax Transition -- coax size and impedance must be specified. (optional: Direct Waveguide input to antenna available.)

  2. Reinforced E-Plane Miter

  3. Fixed Hanger Support Bracket -- systems over 500 Ft. require two (2).

  4. VSWR Tuner Section -- consult factory for quantity needed.

  5. Waveguide Full Straight Section -- size & length by manufacturer.

  6. Vertical Spring Hanger -- one every 10 Ft.

  7. Full Straight Section with Tuners.

  8. Lateral Dampening Brace

  9. 3-Point Horizontal Spring Hanger

  10. Bulkhead Flange

  11. Gas Dump

  12. Gas barrier

  13. Pressurization System

 
27